The newest model – heater QSX is equipped with an electronic touch system, which lets the user set the heater to the desired temperature, indicated on the panel.
The heater has got the TIMER-2H function, which allows to set the working time of the heater for 2 hours. We have also added the masking element, thanks to which the connecting cable, inserted directly into the wall, is invisible.
You can set the desired temperature from 5 to 65 oC.
The heater has got the TIMER-2H function, which allows to set the working time of the heater for 2 hours. We have also added the masking element, thanks to which the connecting cable, inserted directly into the wall, is invisible.
You can set the desired temperature from 5 to 65 oC.
- BACKER heating element
- heating element is equipped with temperature limit fuse and internal temperature sensor.
- possibility of detaching the thermostat from the heating element and its mounting after installation.
- Modern touch-control system
- easy setting by touching the marked place on the sensor.
- increased sealing level, reduced chance of moisture ingress.
- functional operating programme.
- Indication of heating element operation by a glowing line at the bottom of the casing.
- Marking of the radiator temperature by elliptical lamp.
- blue – cold radiator
- green – radiator temperature suitable for drying towels
- red – radiator temperature high, requires careful use, depending on the fabric type
- red flashing light – radiator temperature above 65 degrees, possible overheating of the radiator, requiring everything to be removed from the radiator and thermostat operation checked
- temperature indication is active at all times while the thermostat is on, regardless of the way the radiator is heated, either by the heater or the central heating.
- Thermostat operating mode:
- Asterisk (*))
- 5°C temperature setting used in order to secure against freezing. Thermostat will switch into this mode after SELF TEST and during the reset following power supply loss.
- Heating modes
- 40-50-55°C temperature modes for drying and heating
- 65°C – mode recommended only for heating.
- Timer setting
- Possibility of setting the determined operation time of 2h.
Indication modes
| Voltage | 230v-50Hz | ||
| Heat output (W) | 300 | 600 | 900 |
| Temperature regulation | 5 – 65˚±3˚C | ||
| Cable 1.3m | OMY 3 x 0,75 | ||
| Fuse melting temperature | 102˚C | ||
| Screw-thread | G ½” | ||
| Insulation class | I | ||
| Lenght (mm) | 294 ±3 | 344 ±4 | 394 ±5 |
| Weight (g) | netto: 0,440kg | netto: 0,455kg | netto: 0,465kg |
Available colors of type QSX heater:
WHITE
CHROME
GRAPHITE
BRASS
GOLD
BLACK
ANTHRACITE
Accessories:
- T-pieces
- white
- chrome
- satin
- gold
- black
- black mat
- anthracite
