-
Type GTB
Electric Heater With Electronic Thermostat Type GTB 5/4”, 6/4” -
Type GT
Electric Heater With Electronic Thermostat Type GT -
Type GTX
Electric Heater With Electronic Thermostat Type GTX -
Type MEK
Electric Heater With Electronic Thermostat Type MEK
GTB TYPE IMMERSION HEATER 5/4” FOR BOILER
The GTB type immersion heater 5/4” is an electrical device intended for heating water in enamelled and stainless steel closed type boilers which are equipped with built-in heat exchangers.
Available variants: 1500W and 2000W.
Apply in boilers with a capacity of 100 to 250 L
GTB heater characteristics:
THERMOSTAT – temperature regulation in the range of 30°C – 75°C (+/- 5°C)
OVERHEATING PROTECTION FUNCTION – above 90°C
WORK VERTICALLY AND HORIZONTALLY – provided that it is completely immersed in water
HEATING EL. MADE OF COPPER AND PROTECTED WITH NICKEL – very good thermal conductivity
GTB Technical data |
||
Type | GTB15 | GTB20 |
Heater power | 1500W | 2000W |
Electric power supply | 230V~50Hz | 230V~50Hz |
Insulation class | I | I |
Power network fuse | 10A | 10A |
Power cord | H05VV-F3G1 mm2 | H05VV-F3G1 mm2 |
Cord length | 1.5m | 1.5m |
Ingress protection | IP44 | IP44 |
Temperature control range | 30°C+/-5°C – 75°C+/-
5°C |
30°C+/-5°C –
75°C+/-5°C |
Overheating protection | 90°C+/-4°C | 90°C+/-4°C |
Mechanical attachment ( thread) | G5/4 | G5/4 |
Weight | 0.7 kg | 0.7 kg |
Length | L=390mm | L=390mm |
Electric Heater With Electronic Thermostat Type GT
The heater with electronic thermostat type GT is a device used for heating the systems such as radiators in bathrooms, towel dryers, or as additional element for already existing systems of radiator-heating. It can also be used with other heating elements and devices.
- Made of high-quality components,
- Possibility of fine temperature regulation,
- Easy positioning of temperature regulation button within the field of vision,
- Indicator lamp can be seen from all the angles,
- Safety junction between the radiator and the device,
- Completely protected from eventual over-heating by thermic safety fuse.


- – thermostat housing
- – potentiometer housing
- – heater
- – heater support
- – indicator lamp
- – potentiometer button
- – electrical cable
The novelty of GT electric heater with temperature regulator is that the housing is divided into two units:
- The first unit (the housing A) is fixed to the heater support.
- The second unit (the housing B), which contains the temperature regulation button and power cable, can rotate on the vertical side of the axis, which makes placing it into desired position simple.

When installing it onto radiators (towel dryers), the device is to be installed at the position of the lower bung by using the adequate spanner to tighten it, which ensures safety junction. After installing the device onto radiator, potentiometer housing (B) should be manually adjusted into the position which suits the owner (the potentiometer button should be positioned within the field of vision).
Voltage | 230 V ~ 50Hz | ||||
Heat output (W) | 150 | 300 | 600 | 900 | 1200 |
Temperature regulation | 5-70°C +/- 3°C | ||||
Cable 1.3m | PP/J-Y 3 x 0,75 | PP/J-Y 3 x 1 | |||
Fuse melting temperature | 99 °C | ||||
Insulation class | l | ||||
Screw-thread | 1/2″ | ||||
Weight (g) | 435 | 440 | 460 | 470 | |
Lenght (mm) | 305 | 355 | 405 | 455 |
Available colors of type GT heater:
WHITE
CHROME
GRAPHITE
INOX-GREY
BRASS
SATIN
GOLD
BLACK
BLACK MAT
ANTHRACITE
OLD COPPER
Accessories:
- T-pieces
- white
- chrome
- satin
- gold
- black
- black mat
- anthracite


SWW 1139-63 PKWiU 27.51.25-70.30
CN 8516.10.80
The new model GTX is the effect of CINI’s presence on the Polish and European market and its previous experience with heating technology.
It is used for heating the systems such as radiators in bathrooms, towel dryers, or as additional element for already existing systems of radiator-heating. It works perfectly in the stainless steel radiators.
GTX lifetime is extended by using the stainless steel heating element (1) and adding the capillary (2) with temperature sensor (3) at the tip of it, which allows for a very precise measurement and control over the temperature of the liquid, in which the element is immersed. Special fuse (4) protects model GTX against dry running in case of water loss. It is also worth mentioning that our heating elements are made by a well-known and proven leader among manufacturers – Backer OBR.
It is used for heating the systems such as radiators in bathrooms, towel dryers, or as additional element for already existing systems of radiator-heating. It works perfectly in the stainless steel radiators.


- – thermostat housing
- – potentiometer housing
- – heater
- – heater support
- – indicator lamp
- – potentiometer button
- – electrical cable
- Made with high quality components,
- Possibility of precise temperature regulation (5-70˚C),
- Ring-shaped indicator lamp can be seen from all the angles,
- rubber seal prevents water leakage,
- thermal fuse prevents overheating,
- housing made of two elements allows for an easy access to the potentiometer,
- design matches modern, as well as traditional radiators and towel heaters,
- Saves energy by providing the possibility of heating only one room instead of turning the whole central heating on,
- Eco-friendly packing solution.
The novelty of GTX and GT electric heaters is that the housing is divided into two units:
- The first unit (the housing A) is fixed to the heater support.
- The second unit (the housing B), which contains the temperature regulation button and power cable can
rotate on the vertical side of the axis, which makes placing it into desired position simple.

When installing it onto radiators (towel dryers), the device is to be installed at the position of the lower bung by using the adequate spanner to tighten it, which ensures safety junction. After installing the device onto radiator, potentiometer housing (B) should be manually adjusted into the position which suits the owner (the potentiometer button should be positioned within the field of vision).
Voltage | 230 V ~ 50Hz | |||
Heat output (W) | 150 | 300 | 600 | 900 |
Temperature regulation | 5-70°C +/- 3°C | |||
Cable 1.3m | PP/J-Y 3 x 0,75 | |||
Fuse melting temperature | 99 °C | |||
Insulation class | l | |||
Screw-thread | 1/2″ | |||
Weight (g) | 370 | 420 | 465 | |
Lenght (mm) | 268 | 470 | 596 |
SWW 1139-63 PKWiU 27.51.25-70.30
CN 8516.10.80.
Available colors of type GTX heater:
WHITE
CHROME
GRAPHITEIT
INOX-GREY
BRASS
SATINNA
GOLD
BLACK
BLACK MAT
ANTHRACITE
OLD COPPER
Accessories:
- T-pieces
- white
- chrome
- satin
- gold
- black
- black mat
- anthracite


SWW 1139-63 PKWiU 27.51.25-70.30
CN 8516.10.80
The MEK type is intended for heating different systems: small, such as towel rails, as well as bigger ones, like radiators in the central heating systems. It was designed to be easily installed into all types of tubes, cast, steel and aluminium radiators.
The MEK type appliance is made of the highest quality, attested materials and components, providing the warranty for perfect functioning.
The advantages of MEK over other alternative sources of heating::
- Made with high quality components,
- rubber seal prevents water leakage,
- Saves energy by giving the possibility of heating only one room instead of turning the whole central heating on,
Eco-friendly packing solution.


Voltage | 230 V ~ 50Hz | |
Heat output (W) | 1500 | 2000 |
Temperature regulation | 5-70°C +/- 3°C | |
Cable 1.3m | PP/J-Y 3 x 1 | |
Fuse melting temperature | 99 °C | |
Insulation class | l | |
Screw-thread | 1/2″ | |
Weight (g) | 485 | 555 |
Lenght (mm) | 480 | 630 |
SWW 1139-63 PKWiU 27.51.25-70.30
CN 8516.10.80.
Available colors of type MEK heater:
- white
- chrome
Accessories:
- T-pieces
- white
- chrome
- satin
- gold
- black
- black mat
- anthracite

